Your made-to-measure fitted wardrobe, now in Altea

A made-to-measure fitted wardrobe turns an awkward recess in your home into storage without taking space away from the room. In Altea they are most often planned for bedrooms, entrance halls and corridors, where a whole wall can be given over to storage. Here we look at when a fitted wardrobe is worth it, how to measure up a recess when the walls aren't always square, which doors suit each case and what to check before installation.

Fitted wardrobe · exampleElevation
actual width up to ceiling

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

01 — Before designing

A wardrobe designed for the space you already have

Measuring properly matters in Altea: openings are rarely exact. We start from what is actually on your wall and cover any difference with finishing trims, so the fitted wardrobe sits perfectly in place.

  • Alcove
  • End of a corridor
  • Side of a bedroom
  • Under a beam

A piece that belongs to the space

If you have an unused alcove in Altea, or a whole wall to fill up to the ceiling, the finishes are fitted precisely to the floor, walls and ceiling just as we find them.

The wall matters too

In Altea we check for damp and out-of-plumb walls, as well as the condition of skirting boards and services. If any building work or electrical work is needed, your quote will make that clear.

02 — Measurements

The measurements worth knowing

Rough measurements are enough to get started on your first quote. The final figures aren't down to you: our team takes them at your home.

  1. Distance from side to side of the opening, repeated at three heights → A1–A3
  2. H1–H2Check the height at each end; the lowest figure is the one that counts
  3. FAvailable depth
  4. !Position of every window, radiator, switch and socket
skirting board socket A1 A2 A3 H1 H2
If you're in Altea, empty the space before measuring it. Rather than getting the exact figure right, you're better off taking one photo from the front and another from the side, with the full ceiling in view.

03 — Finishing

Uneven walls, ceiling and skirting board

Walls

The wardrobe sits level

The mismatch against a wall that isn't quite straight, which is common in Altea, is solved with made-to-measure cover strips or trim pieces.

Ceiling

Right up to the top, no gap

With a full-height unit or a separate top cupboard. An adjustment piece covers any uneven ceiling.

Skirting board

Removed or worked around

Whether it is removed or dealt with using a skirting-board cut-out, in Altea we settle it beforehand, before anything is made.

04 — Interior

How to organise the interior

We start from what you store, not from a standard module.

55–60 cm of depth lets you hang clothes on hangers facing forward. If the wardrobe is shallower, we solve it with pull-out rails.
  • 01Hanging rails for long and short clothes, at two heights if there's room
  • 02Fixed or adjustable shelves
  • 03Drawer area for lingerie and accessories
  • 04Shoe rack, trouser rack or pull-out trays
  • 05A top cupboard for suitcases, blankets and clothes that are out of season

05 — Doors

Which doors to choose

Hinged

+You can see the whole interior at once.

−They need a clear space in front so the doors can swing open without obstruction.

Sliding

+They don't take up room space.

−They only let you reach one section of the interior at a time.

Choosing the right exterior material for your wardrobe in Altea (melamine, lacquered, mirror, glass or a combination) transforms its look and also the quote. Inside, a simpler option is possible.

07 — Price

What affects the price?

An initial estimate is there to guide you. Manufacturing comes later: before that, you receive in writing what it will really cost.

01

Measurements and finishing

Out-of-square walls, height up to the ceiling and top cupboard.

02

Doors

Doors, material and opening system.

03

Interior

Layout, drawers and fittings.

08 — Process

How your order progresses

More about how we work →
  1. 01First contactYour address, a few photos and rough measurements are all we need to give you a ballpark figure.
  2. Step 02 · measuringWe measure up the spaceWe check several points on the walls, ceiling and skirting board.
  3. 03Design stage, only if neededWe work with the final measurements and the conditions you approved in the proposal.
  4. 04Fixed priceA single amount covering interior layout, doors, materials, fittings and installation, with a delivery schedule.
  5. 05Go-ahead and depositYou review the project, give us the go-ahead and make the advance payment we agreed.
  6. 06 · 2–3 wksWorkshopThe wardrobe carcass is built, along with the fitting pieces that adapt it to your space.
  7. 07Installation and adjustmentsLevelled, gaps closed against walls and ceiling, doors adjusted.
  8. 08Joint sign-offWe go over the whole wardrobe, door by door and drawer by drawer. Anything outstanding is noted down on paper.

What to prepare before installation

  • Empty, accessible recess
  • Floor and walls finished
  • Electrics sorted inside the recess
  • Access to the building entrance and lift

Limits of this solution

A wardrobe won't fix damp: it needs to be treated first.

Work such as plasterboard, building work or electrical installation is only added if your quote for Altea says so.

In Altea, if the wall is significantly out of plumb, the compensating cover panels have to be wider and are more noticeable.

01

When a fitted wardrobe is worth it

A made-to-measure fitted wardrobe beats a freestanding one when there is a niche, an alcove or a stretch of wall that would otherwise go to waste. By closing the unit against the walls, floor and ceiling, dust traps and visible joints disappear, and the whole volume becomes storage space. It's the best option for narrow bedrooms in Altea, where every ten centimetres count.

If the room changes a lot, or your home is rented and you plan to move soon, a wardrobe that can be taken apart may suit you better. If you're staying, though, a wall-to-wall wardrobe feels like part of the home's architecture rather than an added piece of furniture.

White six-door fitted wardrobe with wooden handles in a bedroom with exposed beams in Altea

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

02

Measuring the recess: width, height and depth at several points in Altea

A wall recess is rarely a perfect rectangle. That's why the width is taken at the top, at mid-height and at the base, and the height at both ends and in the middle. If the figures don't match, the unit is designed to the smallest one and the finishing pieces take up the difference.

The depth is also measured at several points, because the wall may not be flat and the skirting board takes up a couple of centimetres. In a home in Altea with thick walls or old plaster, these variations are common, which is why the measuring visit is done with a level and plumb line before manufacturing begins, not with a tape measure held up by eye.

Have you already measured the space?

Send us a picture of the opening and your rough dimensions via WhatsApp, and you'll get a first guideline for your project in Altea from us.

03

Crooked walls, skirting boards and finishing from floor to ceiling

  • 01

    The joins with the building are what most distinguish a well-fitted built-in wardrobe from an improvised one. Finishing profiles, or filler strips, cover the gap between the unit and the wall and let the front sit flat even when the wall isn't. The more irregular the wall, the wider the profile needed.

  • 02

    There's a decision to make first: whether the wardrobe goes up to the ceiling or leaves a gap above. A top cupboard up to the ceiling gains you very useful volume, but the ceiling needs measuring carefully, because if it slopes to one side the upper door will need adjusting. The existing skirting board is removed or trimmed depending on the case, and this is agreed before installation.

04

Doors and access to the interior

In a fitted wardrobe, the door is the visible part and shapes how everything else is used. Hinged doors give full access to the interior, but need clear space in front to open. Sliding doors take up no room space, although they only show part of the interior at a time.

Bifold doors sit between the two: they fold back on themselves and open up more of the wardrobe, but need better-quality tracks. Which to choose depends on how much clearance you have in front and how you use the wardrobe. If you open it several times a day, full access matters more; if space is the priority, sliding doors usually win.

05

Interior layout for clothes, drawers and top cupboards

In a built-in wardrobe the interior is organised in vertical columns that follow the width of the whole unit. A column with a long hanging rail for dresses and coats, another with a double rail for shirts and trousers, one of shelves for jumpers and a drawer unit for small items will cover almost any wardrobe.

The top cupboard, which in fitted wardrobes runs from floor to ceiling, is used for suitcases, blankets and out-of-season clothes. To reach it comfortably, the upper door is made narrower or given a different opening. If the space is deep, it can be put to use with pull-out rails. Every layout is tested against your actual measurements before going into production.

Oak fitted wardrobe with open doors, drawers and hanging clothes in a bright bedroom in Altea
Measuring visit

Ask us to come and measure up in Altea

  • 01Tell us who you are and where your home is.
  • 02Your schedule comes first: over WhatsApp we ask when suits you and note it down.
  • 03If you place the order with us, the measuring visit is free; if not, it costs €50.
06

What to check before installation

When the wardrobe arrives, the wall needs to be ready. That means no damp and no protrusions that need chipping back, sockets and light switches marked out, and a floor flat enough to level the whole unit. If any services run through the space, you need to decide whether to move them or leave an access panel.

It's also worth checking that your home's access allows the boards to be carried up: lift, stairs, door widths. Fitted wardrobes are made in pieces that are assembled on site, so it's rarely a problem, but we flag the largest dimension to avoid surprises. With all of that checked, installation in your Altea home is clean and quick.

07

What affects the quote for a fitted wardrobe

  • 01

    Three things drive the cost: the length of wall covered, the type of door and the amount of interior fittings added. A sliding door with a mirror costs more than a plain hinged one, and a full-height top cupboard uses more material than a single-height wardrobe.

  • 02

    The finish makes a difference too: melamine is hard-wearing and costs less, while lacquered or wood-veneer finishes move away from the base price. The configurator lets you set approximate measurements and combinations, and our team sends an estimate based on them. The measuring visit costs €50 if the order doesn't go ahead, and manufacturing takes two to three weeks on average.

08

When the space isn't right for a fitted wardrobe

Some wall recesses just can't take a fitted wardrobe. If the alcove is very shallow, less than about forty centimetres, hanging clothes won't fit facing forward and you'll need rotated rails or shelves. If a pillar or window intrudes into the space, the design has to work around it.

When the recess doesn't help, there are other options: a freestanding made-to-measure wardrobe, a corner wardrobe to make use of a corner, or a walk-in wardrobe if the room has plenty of space. What matters is being clear about what you need to store. With that list and the measurements of the space, we can assess whether a made-to-measure fitted wardrobe is the most sensible route in Altea.

09 — Enquiry

For your fitted wardrobe in Altea, the first step is to tell us your idea

  1. 1We start by reading what you tell us and looking at your photos.
  2. 2You receive your first figure in Altea via a WhatsApp message.
  3. 3We come to measure up in Altea and then give you the final quote. The measuring visit is only charged, at €50, if you don't end up commissioning us; if you do, it's on us.

Here in Altea, our team won't touch a single board until you've confirmed the design proposal and its cost.

Your fitted wardrobe

2 MIN

We leave the WhatsApp message already written for you. You check it at your own pace, send it whenever you like and add your photos straight into the conversation.

10 — Questions

Questions about fitted wardrobes

Once the installation is finished, we'll explain how your wardrobe is covered and how to look after it in Altea.

Can you fit a wall recess that isn't square?

Yes. The wardrobe is designed to the tightest measurement, and finishing trims cover the gap against the wall. The greater the deviation, the wider the trim needs to be. That's why the recess is measured at several points before we draw up the wardrobe.

Does a fitted wardrobe need building work?

Normally not. It fits against the walls, floor and ceiling the room already has. We only step in if something is in the way, such as a protrusion, damp or services crossing the space, and that is checked at the measuring visit.

Can it go up to the ceiling with a top cupboard?

Yes, and it's one of the biggest advantages of a fitted wardrobe. The top cupboard adds a lot of volume for suitcases and out-of-season clothes, and it closes with doors from the same range as the rest so the whole thing looks like a single plane.

Can I keep anything from my existing wardrobe?

Sometimes. If the carcass is solid and fits the new design, it can be reused and just the doors or interior renewed. Otherwise, it's more practical to design a whole new one. We decide after checking the condition of the unit.

How is a fitted wardrobe better than a freestanding one?

A fitted wardrobe closes against the walls and ceiling, makes use of the full volume and leaves no dusty gaps. A freestanding one sits in front of the wall and can be moved or taken apart, but you lose some of the space.

Got a space you're not making the most of?

In Altea all you need is a photo from the front, the width at the top and at the bottom, and a message on WhatsApp. We charge €50 for measuring if you don't go on to commission the work; if you do, that measuring visit costs you nothing.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote