Made-to-measure natural wood wardrobes in Altea

Ordering a natural wood wardrobe in Altea is a decision about materials before it is a decision about design. The phrase can mean many things: solid wood throughout, board covered with genuine veneer, or a mix of the two depending on the part of the wardrobe. This page helps you pin down what you want, where each option adds value and what should be put in writing before your natural wood wardrobes are made.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

What natural wood means in a wardrobe

Plan · example Elevation · wood
2,40 m 123
1Vertical grain on the doors 2Edging and trim in the same tone 3Plain board interior

In sales language, natural wood covers very different situations. Some wardrobes have solid wood fronts, others have oak veneer over board, and others have a printed finish that imitates the grain. All three can look similar in a photo, but they behave differently over time, with humidity and with everyday wear.

That is why it helps to start with one concrete question: which parts do you want to be genuine wood? It could be just what is visible, such as the doors and sides, or the shelves and drawers as well. The clearer you are, the easier it is to compare quotes and to avoid two offers looking identical when they include very different materials.

01

Solid wood, natural veneer and the board underneath

Solid wood is a block of timber, either a single piece or joined strips. It has depth and can be sanded and refreshed, but it swells and shrinks with changes in temperature and humidity. That is why it is used for doors of moderate width or for frames with panels.

Natural veneer is a thin sheet of real wood, a couple of millimetres thick or less, bonded to a fibreboard or chipboard core. It gives you an authentic grain with excellent stability on tall doors and wide side panels. The core matters as much as the veneer: a good-density board prevents warping and keeps the edges firm for years.

Oak fitted wardrobe with flat doors and integrated handles in a bright bedroom in Altea
02

Genuine wood outside, simple board inside

A wardrobe divides into three zones with different needs. The doors are what any visitor sees and they take knocks and constant opening; the carcass is the structure that holds everything together; the interior is the shelves, drawers and back panels, which you handle every day. The three don't need to use the same material.

A common approach is to keep genuine wood on the visible doors and sides, and use melamine-finish board inside. That focuses the budget where it is seen and keeps the interior easy to clean. If you would like natural wood inside as well, veneer can be applied to shelves and drawer fronts, at a higher cost.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Grain, tone and continuity between doors

  • 01

    The grain is what makes a natural wood wardrobe look alive, and it is what varies most from one piece to the next. If each door is cut from a different board, the patterns don't match and the whole looks disjointed. With veneer you can ask for grain continuity, meaning neighbouring doors form one flowing pattern.

  • 02

    You also need to decide on direction: vertical grain emphasises height, horizontal gives a sense of width. The tone depends on the species and the finish. The same wood looks very different under a clear varnish, an oil or a stain. Seeing a sample in the light of your own room is the most reliable way to choose, because tones are distorted on screen.

04

Protective finish and maintenance

Unprotected wood absorbs stains, grease and moisture. The most common finishes are water-based varnish, oil and wax. Varnish forms a hard, easy-to-clean layer. Oil soaks into the fibre, brings out the feel of the wood and can be topped up with a cloth when it wears.

Maintenance varies with the finish. A varnished front is cleaned with a soft cloth and mild soap. An oiled one can take an annual touch-up with the same oil. If your natural wood wardrobe is in a home in Altea with large sun-facing windows, avoid direct sunlight, which lightens the tone over the years, and keep reasonable ventilation in the room.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

Design and stability of large pieces

A tall solid wood door tends to bow. The usual solution is to divide it into panels within a frame, or to switch to veneered board, which is stable by construction. In floor-to-ceiling wardrobes, the width of each door is limited and the hinge positions are reinforced.

Large-format doors, over two metres tall, are assessed case by case. Weight matters too: a large solid door needs reinforced hinges and a carcass properly anchored to the wall. In a sliding wardrobe, the weight of the doors determines the tracks. These points are resolved when the project is drawn up, not once the wardrobe has already been made.

Made-to-measure oak wardrobe with flat doors and an integrated handle in a bedroom with a terracotta floor in Altea
Measuring visit

Ask us to come and measure up in Altea

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

What affects the price of wood in Altea

Two wardrobes of exactly the same size can cost very different amounts depending on the material. The species makes a big difference: oak, walnut and ash are not priced the same. It also matters whether the doors are solid or veneered, the thickness of the veneer, how complex the finish is and how many pieces need a continuous grain.

To keep your investment under control, it helps to think in layers: first how much of the surface will be genuine wood, then which species, and finally which finish. In the configurator you can describe your idea with approximate measurements and the team will prepare a guide price. The measuring visit costs €50 if you don't go ahead with the wardrobe, and there is no charge if the order goes ahead. Manufacturing takes around two to three weeks.

07

What the quote should spell out

  • 01

    A clear quote for natural wood wardrobes names the species, the type of piece and the finish for each part. It isn't enough to just say "wood": it should state whether it is solid or veneered, which species, what veneer thickness, which board sits underneath and how it is protected.

  • 02

    It's also worth having the grain direction, the approved sample and any parts made from a different material, such as the interior or the backs, written down. If you have a wardrobe in Altea that gets strong natural light, ask for the finish reference too. With these details in writing, any later question can be settled by checking the document rather than relying on the memory of a conversation.

Enquiry

Tell us about your project in Altea

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Altea

After installation: warranty and care for your wardrobe.

Does the whole piece of furniture have to be solid to count as natural wood?

No. Many natural wood wardrobes combine solid doors with veneered sides, or use genuine veneer across the whole exterior. What matters is that each part is described with its real material, so you know what is genuine wood and what has a different backing.

How does wood veneer differ from a finish that only imitates the grain?

Veneer is a thin sheet of real wood, with its own pores and texture, and it can be carefully sanded and refreshed. A finish that imitates the grain is a print on melamine or laminate: it stands up well to everyday use but lacks the depth of natural wood.

Can I approve the grain pattern before the doors are cut?

Yes, and we recommend it. Seeing the sample in the light of the room avoids surprises with the tone. You can also agree whether neighbouring doors follow the same grain or whether each is taken from a different board.

Which parts should be listed separately in the quote?

Doors, sides, shelves, drawers and backs. Each can use a different material, and seeing the breakdown lets you decide where to invest in genuine wood and where to save with a simpler board.

Which wood species can I choose from?

The species available depend on the manufacturing confirmed for your project. The usual approach is to start from light, medium or dark tones and then use real samples to settle which species and finish suit your home.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote