How we work in Altea: from first contact to installation

Ordering a made-to-measure wardrobe in Altea is much simpler when you know what comes after each step. This page walks you through the whole process: sending your measurements and photos, the ballpark figure, the measuring visit, the written quote, your confirmation, manufacture, installation and the final check together. That way you know when the decisions are yours, which documents move from one stage to the next and what it helps to have ready.

  1. 01Ballpark price
  2. 02Measuring
  3. 03Design
  4. 04Final quote
  5. 05Approval
  6. 06Manufacture
  7. 07Installation
  8. 08Final check

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

The eight stages of your order

  1. 01

    Guide price

    Tell us what you're looking for and send photos, approximate measurements and your address. We'll come back to you with a guide price; the final amount will depend on the measuring visit.

    By WhatsApp
  2. 02

    Measuring visit

    We'll find a slot in your diary to visit and look at the space and the access routes. In Altea we charge €50 for this visit only if the order doesn't go ahead; otherwise it's free of charge.

    €50 if you don't order
  3. 03

    Design and plans, if needed

    Making starts once we've measured up; the proposal for Altea sets out what we've agreed with you.

    Depends on the project
  4. 04

    Final quote

    Once the measurements are approved, in Altea we bring together the layout, materials, fittings, installation and the total cost in a detailed quote.

    In writing
  5. 05

    Approval and deposit

    Once you've approved the proposal and paid the advance payment we agreed, we get your order under way in Altea.

    Agreed deposit
  6. 06

    Manufacturing

    Once the project is approved, we get on with manufacturing and organise the pieces for transport and fitting in Altea.

    The average lead time, from the advance payment, is 2 to 3 weeks
  7. 07

    Installation

    We bring the furniture to your home in Altea; there we install it and fine-tune the doors, fronts and finishing touches.

    At your home
  8. 08

    Walk-through with you

    We check the doors, finishes and how everything works, and note down any outstanding adjustments in writing.

    In writing

Stage 01

What we need for an initial assessment

  • —Start by telling us what kind of solution interests you: fitted wardrobe, sliding doors or walk-in wardrobe; or admit that you're still undecided
  • —Neighbourhood or town
  • —Rough measurements in cm: depth, height and width
  • —Photos of the available area, both head-on and from the side
  • —Note down everything you need to store: hanging clothes, folded clothes, shoes and suitcases
  • —If you've already thought about it, the doors and finishes you prefer

No drawing or exact measurements needed.

Stage 02

What we check when we come to measure

  • —Width and height at several points, to spot uneven walls or ceilings
  • —Floor level and skirting board
  • —Features such as windows, beams, sockets, radiators or switches
  • —Clear space at the front to open the wardrobe
  • —To bring the pieces up, we need to know what the building's entrance, stairs and lift are like

Stages 05–08

Approval and installation day

How approval works

In Altea, based on the final measurements, the interior, doors, fittings and materials are settled, and the detailed quote covers every element. Once you've approved it and paid the advance payment, the wardrobe goes into production.

What you prepare

In Altea we ask that the space is clear and easy to get through, with the floor and walls in their final finish. Moving sockets or knocking down a partition wall are renovations that need to be done before we arrive.

What we do

After fitting the wardrobe in Altea, we adjust it and inspect it with you, noting down any finishing touches still to be done. Removal of the old furniture we're replacing, only if you ask for it, will be included in the quote.

01

1. You send your measurements and photos

The starting point is the configurator. You tell us the type of wardrobe, the approximate width, height and depth, the door system you like and how you want the interior laid out. If you can, add one or two photos of the alcove or wall.

The measurements don't need to be exact: they are a basis for assessing the project, and they will be checked before anything is confirmed. Once you send this, a design is prepared and passed to the team along with your contact details and the project address in Altea or the surrounding area.

Phone on a tripod measuring an empty bedroom with a tape measure, to plan a made-to-measure wardrobe in Altea
02

2. You receive a guide price

Within 24 hours of receiving your configuration with measurements, the team will reply with a guide price, free of charge. It is a starting figure to help you see whether the project fits what you had in mind, not a fixed commitment.

If the figure comes in higher than you expected, this is the best moment to adjust things: change a door type, simplify the interior or drop an extra. To understand what drives the cost, see what affects the price.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

Have you already measured the space?

Take a photo, jot down the measurements as best you can and share it on WhatsApp: in return we'll guide you from the very first moment.

03

3. The measuring visit in Altea

  • 01

    If the guide price suits you, we arrange a visit to your home in Altea to take the actual measurements. We check that the walls are plumb, the height at several points, the skirting board, the sockets and anything else that affects the wardrobe, and we talk through how the pieces will be brought up.

  • 02

    The visit costs €50 if you end up not ordering the wardrobe, and is free if you go ahead. It's also a chance to clear up any questions about finishes, handles or lighting, with a sample in front of you where possible.

04

4. Final written quote

Once we have the real measurements, we draw up the final quote. It should state the dimensions, the number and type of doors, a description of the interior, named materials, hardware, manufacturing time, payment terms, what the installation includes and what is not covered.

Read it through calmly. If anything is unclear, ask for it to be clarified in writing before going any further. A well-detailed quote is the basis for a good understanding between us, and the best reference if a question about what was agreed comes up later.

05

5. Approval and changes

When you give the go-ahead, the materials and layout are confirmed, and the payment terms set out in the document are agreed. From there, production is prepared, and any change is assessed and communicated in writing.

Changing a colour before manufacture is easy; changing the layout once the pieces have been cut can affect the timescale and the cost. That's why it's worth checking the design carefully before approving it, ideally together with whoever you share the home with.

Made-to-measure four-door wardrobe lacquered in off-white with oak shelving and plans on the table in Altea
Measuring visit

Book your home measuring visit in Altea

  • 01Send us your name along with the area where you live.
  • 02We'll get in touch on WhatsApp so you can choose the day that suits you best.
  • 03A €50 payment is required for us to come and measure up, a sum that is waived if you then place the order with us.
06

6. Manufacturing and installation date

Manufacturing takes between two and three weeks on average. Installation is not included in that timeframe: it is arranged separately, and the date is agreed with you according to both sides' availability and the building's conditions.

While your wardrobe for your home in Altea is being made, it's a good time to get the house ready: clear the wall, free up the access corridor and, if you live in a block, let the administrator or neighbours know if the lift or a time slot needs to be reserved.

07

7. Get your home in Altea ready before the wardrobe arrives

  • 01

    On installation day in Altea, you'll be glad to have the space and the route clear. Move small items of furniture out of the way, protect the floors if you wish, and check that any light or socket points that will sit inside the wardrobe have been decided.

  • 02

    If the space needs preliminary work, such as painting or correcting a skirting board, it's best to finish it before the agreed date. Let us know if anything changes with access, such as works in the entrance hall or in the corridor, so we can plan the delivery without surprises.

08

8. Final check and reporting any issues

Once the installation is finished, we go over the wardrobe with you: door alignment, smooth opening, levelling, finishing touches and cleaning. This is the time to point out any outstanding adjustments so they can be noted down.

If you notice something later on, such as a door that rubs, write to us with your project details and attach a photo. The terms that apply to each order are set out in its written quote. Tips on use and maintenance are gathered on the wardrobe care page.

Questions

Questions that often come up when planning a wardrobe in Altea

Who looks after each project, from design to installation? Get to know us at SI, ARMARIO.

Is the figure you send me before measuring the final one?

No. The guide price is based on approximate measurements and is there to help you decide whether to go ahead. The final quote arrives in writing after the measuring visit at your home, with the specific materials, fittings, timescale and terms.

Can I change the design once I've given the go-ahead?

It depends on the timing. Before manufacturing starts, changes are usually easy to sort out. Once the wardrobe is in production, an adjustment may affect the timescale and the cost, and we'll tell you before going ahead so you can decide with all the facts in front of you.

How long does the whole process take?

Manufacturing takes two to three weeks on average. On top of that come the date of the measuring visit and the installation date, which are agreed around your diary and the team's, so the total timeline depends on both.

Can I ask for help filling in the configurator?

Yes. If you get stuck on a measurement or an option, write to us from the contact page or via WhatsApp and we'll guide you through completing it. Once you've sent your design, you can go on to request a quote.

Shall we start with step one?

Send us three measurements and a picture from Altea on WhatsApp, and our team gets to work. A photo taken on your phone does the job perfectly.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote