Interiors and storage for made-to-measure wardrobes in Altea
A wardrobe can have lovely doors and an interior that simply doesn't work: hanging rails set too low, shelves that can't take the weight, drawers that clash with the doors. We plan the interiors of made-to-measure wardrobes in Altea the other way round, starting with what you keep and how often you use it. With that inventory in hand, we lay out the hanging rails, shelves, drawer units and top cupboards, whether in a new wardrobe or inside a unit you want to keep.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
Start by taking stock of your clothes
Before talking about modules or wardrobe storage, it pays to count. How many shirts and dresses hang, how many pairs of trousers are folded, how many pairs of shoes there are, and which suitcases or duvets need to fit in the top cupboard. That count is the basis of any wardrobe interior layout, because it decides how many metres of hanging rail and how many shelves you need.
A practical trick is to sort your clothes into three piles: what you wear every week, what's seasonal, and what you almost never take out. The first pile deserves the most comfortable zone, between waist and eye level. The second goes up high or down low. The third goes in boxes in the top cupboard. With that list in hand, designing the wardrobe interior stops being guesswork and becomes a layout with measurements.
How many usable centimetres are left inside the unit
The centimetres of the wall aren't the ones you can actually fill with clothes. The sides, the thickness of the shelves and the space taken up by hinges or runners all take away centimetres, and that changes how many columns fit. That's why the interior is measured with the finished wardrobe or, in an existing unit, with the doors opened fully.
We note the clear height from the floor to the top of the unit, the depth at the bottom and at the top, and any obstacle: a skirting board, a pipe, a beam. In a home in Altea with whitewashed walls or uneven finishes, two measurements of the same depth can differ by a couple of centimetres, and that difference decides whether a forty-centimetre drawer unit will close properly.

Hanging rails, shelves, drawers and top cupboards: how they're laid out
In wardrobe interiors, each element has its natural height. A rail for long clothes needs around one hundred and sixty centimetres clear; one for shirts and jackets, about one hundred and ten. If you combine a double rail in one column, you gain hanging space at the expense of shelves, and it's worth making up for it with another column of shelves for jumpers.
Adjustable made-to-measure shelves are useful while your wardrobe changes, but over long spans they bow under the weight, so they're reinforced or shortened. Drawers hold the small things, from underwear to belts. The top cupboard is kept for seasonal items. If most of what you store is folded clothes, a column of shelves matters more in the design than a continuous rail.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Footwear, long clothes and accessories
- 01
Some items need a space of their own. Shoes call for sloped shelves or pull-out shoe racks, with a different height for boots and for sandals. Long clothes need an uninterrupted column, and party dresses are best kept on a separate rail where nothing rubs against them.
- 02
Accessories such as ties, bags, caps or costume jewellery tend to get lost at the back of the wardrobe. Made-to-measure drawer units with dividers, or a shelf with a low front, keep them visible. Each of these solutions changes the installation work: a pull-out shoe rack needs runners and room to extend, whereas an extra rail only needs a bracket firmly anchored to the side panel.
Adapting an existing wardrobe: what can be kept
You don't always need to throw the unit out. If the structure is solid, the doors close well and the depth is enough, you can redo just the wardrobe interior: remove the fixed shelves, put the rails at a different height and add drawer units that wouldn't fit before. The first thing is to check the condition of the carcass, the fixings to the wall and any damp at the bottom.
There are limits. An old wardrobe with swollen board sides or a back panel that doesn't hold can't take a new load. A light interior with a few thin shelves won't take heavy drawers either. What we assess in each case is whether it's worth investing inside a unit that will have to be replaced later, or whether it makes more sense to design everything afresh.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Useful accessories and ones you can do without
A good storage accessory for wardrobes changes your daily routine: the pull-down rail that brings clothes down from the top cupboard, the pull-out trouser rack, the wire basket for laundry, the tray with dividers. Others are expensive and rarely used, such as rotating carousels in a narrow wardrobe or motorised rails.
The key question is what problem each piece solves. If you have twenty pairs of trousers, the trouser rack pays for itself; if you only have four, a rail with four hangers is enough. Also check the space each accessory needs when it opens, so it doesn't clash with other drawers, the door handle or clothes hanging in front.

Ask us to come and measure up in Altea
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
Interior materials and fittings
The inside of a wardrobe doesn't get seen as much as the doors, but it takes the wear of daily use. A melamine board of sufficient thickness copes well with the usual shelves, and the edging must be sealed to resist ambient humidity. On the longer shelves, a reinforcing strip at the front stops them sagging over time.
The fittings set the feel of quality every time you open it: soft-close runners on the drawers, metal supports for the hanging rails, handles or push-to-open fronts depending on the design. In a home near the sea, like many in Altea, it's worth choosing anti-corrosion-treated parts in the dampest areas. The quote should state the type of runner and the thickness of the board.
What determines the price of a new interior in Altea
- 01
The cost of wardrobe interiors comes down to just a few things: the linear metres of wardrobe, the number of drawers, the type of runner, any pull-out accessories and the interior finish you choose. A simple made-to-measure interior of rails and shelves costs less than one with full drawer units, even if they fill the same space.
- 02
To get a rough idea, the starting point is the configurator: you enter your measurements and layout, and the team prepares an approximate figure from what it receives. Then comes the measuring visit in Altea, which costs €50 only if you don't go ahead with the work. Making the order takes between two and three weeks on average, and the installation is arranged separately.
Enquiry
Tell us about your project in Altea
- 1We read your message and look at your photos.
- 2We reply on WhatsApp with a first figure.
- 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.
We don't cut a single board until you've approved the design and the price.
Questions
Frequently asked questions about wardrobes in Altea
After installation: warranty and care for your wardrobe.
Can the wardrobe interior be redone while keeping my existing doors?
Yes, as long as the doors and the carcass are in good condition and the depth allows the new layout. We measure the usable interior with the doors open and design rails, shelves or drawer units that respect the doors' range of movement.
My wardrobe is old: what do you check before renovating the interior?
The sides and the base, in case the board has swollen, the wall fixings, the back panel and the fittings. If the structure is sound, a new wardrobe interior can give you far more use without replacing the unit.
How do you make sure the drawers don't catch on the doors?
In the interior layout, we work out the travel of each drawer together with that of the door. With hinged doors, we leave a clear gap or set the drawers back. With sliding doors, we look at the columns that sit behind each door.
Can I order just drawers, shelves or individual accessories?
Yes. A partial order is common: made-to-measure drawer units for a wardrobe that's already installed, made-to-measure shelves for a particular section or an extra rail. We check beforehand that the new parts will fit with what's already there.
What height should the rail be for dresses and coats?
Between 150 and 160 centimetres clear down to the floor or the next shelf. For shirts and jackets, around 110 is enough. We measure your clothes and adjust it to the centimetre.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

