Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · Altea
Planning made-to-measure wardrobes in Mascarat (Altea) starts with a question that is often forgotten: how will you see and find your clothes inside the unit? This page covers what is worth deciding before you request a quote: where to put the lighting and sockets, which doors to choose, how to divide up the interior and what details to send us so we can give you a guide estimate and arrange the measuring visit.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Mascarat (Altea)
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Mascarat (Altea)
Say you're replacing the bedroom wardrobe in your home in Mascarat and want it to have its own lighting. The most practical decision is where the power comes from. Find the socket or junction box closest to the space and note how far it is from the floor and from the side where the unit will go. If there is a switch on the wall that will be covered, note that down too: it will need to be moved or an access panel left.
Then decide how you want it to switch on. In Mascarat, as anywhere, the deciding factor is daily use, not the catalogue. A strip under the top shelf lights the rails from above; a vertical profile beside the side panel suits deep walk-in wardrobes; a recessed spotlight goes in the ceiling of the space. An opening sensor switches the light on when you open the door, so you don't need a switch. With those answers, the configurator lets you mark where each piece will go, and at the measuring visit, which costs €50 if you don't order the wardrobe and is free if you do, we confirm where the cable will run and which transformer will fit.
Tell us about your space
Mascarat is a district of the municipality of Altea, in the province of Alicante, at the foot of the Sierra de Bernia, next to the boundary with Calpe and close to the Campomanes marina. It helps you place it on the map, and you give us the exact address of the job when you send your request.
That address lets us check the service area and schedule the measuring visit. If your home in Mascarat is a second home you use seasonally, tell us when you'll be there so we can fit the visit around you. It also helps to know whether access to the flat or house is by stairs, lift or from outside, because that affects how the modules are carried up.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
With a fitted wardrobe, the wiring can be completely hidden. The sides have a channel for the cable to run up to an internal power strip, and the top is closed with a panel that hides the transformer. The result is a smooth front, with no boxes or cables on show.
For fitted wardrobes in Mascarat, the first measurement is the usable depth you can give up. At sixty centimetres you hang clothes facing forward; at forty-five you need to turn the rails sideways or use shelves. Think about the space left around it too: a six-metre wall doesn't have to be filled completely, and sometimes it's better to leave a stretch free for a bench or a chest of drawers. There is more detail on the fitted wardrobes page.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Between the classic wardrobe and the full walk-in wardrobe there is a middle option: a wardrobe with an open section, with visible hanging rails, a bench and a mirror. It goes along one long bedroom wall and combines closed doors and open shelves in a single run. Lighting plays a big part here, because whatever is on show needs to look good.
In wardrobes with a dressing area in Mascarat, a warm strip above the open rails gives a soft glow in the evening, and a more neutral strip inside the doors helps you tell navy from black. If you share the bedroom, have two independent circuits installed, one for each side, so you don't wake anyone. To see the combinations, visit dressing-room wardrobes.
If you have a spare room, a made-to-measure walk-in wardrobe in Mascarat lets you light each area separately. A general ceiling light lets you move around, and strips under the shelves draw the eye to your clothes. You can add vertical profiles beside the mirrors, and one switch per section so you don't have to light everything up just to find a pair of shoes.
How the room is laid out depends on the door. If it opens inwards, allow for its swing; a sliding door saves that space. Leave a metre of walking space between the fronts and keep one wall free for a full-length mirror. The rest comes down to what you store: shoes, bags, coats, summer clothes and suitcases. Have a look at the layouts under made-to-measure walk-in wardrobes.
Lighting and finishes affect each other. A light-coloured interior reflects more light and needs less power; a dark one looks elegant but calls for longer strips. On glass shelves or shelves with a metal edge, the light spreads downwards; on melamine shelves, it's best to fit the strip at the front rather than behind.
Drawers with soft-close runners and dividers keep small items in order, and pull-out rails make the most of deep wardrobes. The door fronts are chosen separately: plain, wood-grain or mirrored. In the configurator you put together the interior layout and choose a colour; the fittings and exact finishes are checked before the order is confirmed.

For a wardrobe quote in Mascarat, lighting is added to the usual items in the quote: size of the unit, number and type of doors, drawers and accessories, finish of the fronts and trim. A light profile with a sensor and transformer costs more than a simple strip, and an installation with several circuits takes more work than a single connection.
When you send your design with the measurements from the configurator, the team gives you a guide figure within 24 hours, at no cost, and the final price is confirmed after the measuring visit. If you'd like to see how that figure is worked out, see the prices page, or simply request a quote with photos and dimensions.
The visit checks what you can't see from home: how straight the walls are, the condition of the ceiling, the exact position of sockets and pipes. If the project involves major building work, the body to apply to for permits is Altea Town Council. For fitting the wardrobe itself, one is not usually needed.
Manufacturing takes two to three weeks on average from the deposit; installation is arranged separately once the unit is ready. Before that date, leave the space empty, let your residents' association know if there is a lift, and check that the modules fit through the entrance. The full process is under how we work.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Tell us where the nearest socket or junction box is, the height of the switch, and whether you'd like the light to come on with a sensor or a push button. A photo of the wall showing these details helps. At the measuring visit we'll confirm where the cable will run.
A neutral strip, neither too cool nor too warm, that shows dark shades clearly. Place it at the front edge of the top shelf so it shines downwards. On the inside of the doors, a second strip helps you see the back of the wardrobe.
Yes, using self-adhesive strips with batteries or with a plug-in transformer. If the design is new, it's better to plan it in from the configurator, so the channels and trims stay hidden and there are no loose cables.
You enter it when you send your request. It doesn't have to be your usual home address, because it's the address where the wardrobe will be installed, whether that's in Mascarat or elsewhere in the municipality. We use it to check the area and schedule the measuring visit.
The width, height and depth of the space, the number of doors and the type of opening, plus photos of the wall. From that, the team prepares the figure, which is adjusted after the measuring visit at your home.
Set up your design with interior lighting and approximate measurements, or message us on WhatsApp. You'll receive an estimate, and then the measuring visit is booked.