Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · Altea
If you're thinking about made-to-measure wardrobes in Xaló, the first thing to decide is what the wardrobe needs to hold and which wall will take it. This page walks you through it: how to measure up, which doors to compare, how to organise the interior and what the quote depends on. The project is prepared in the configurator, using your measurements, and you get an estimate before anyone sets foot in your home.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Xaló
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Xaló
Imagine you want to renovate the wardrobe in the main bedroom in Xaló and you can't decide between one continuous front and two separate modules. One way to settle it is to combine functions: a narrow module with floor-length doors for coats and long dresses, and another with shelves and drawers for anything that gets folded. Each module can have a different front, one plain and one with a handle, without the whole losing its coherence as long as you repeat the colour and height.
The process is simple. First, note down what you store and how long your longest items are. Then measure the wall at three heights, because walls are rarely the same at the top and the bottom, and photograph the sockets, windows and skirting boards. With that, open the configurator, place the modules and see how it looks. The limit of this idea is space: if the wall is short, two modules with different fronts can look cluttered, and then a single front with a well-planned interior is the better choice. That decision is fine-tuned with the configurator in front of you.
If your home in Xaló has a long corridor, a hallway or a utility room, the same modular approach works there too: one column of shelves for shoes, another for bed linen. What matters is that each module has a clear purpose and that no wall gets filled before it has been measured. That way the order reaches the Altea team with the idea already settled.
Tell us about your space
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Xaló is a municipality in the Marina Alta, in the inland north of the province of Alicante, with the river Jalón running through its municipal area. For your project this means something very practical: the address you give when requesting a quote determines how the measuring visit and delivery are organised, and you confirm that address yourself; we don't assume it.
When you get in touch, tell us about the room, what the wardrobe will be used for and whether the work is part of a renovation. There's no need to describe the town or the street. It matters more to know whether there are stairs or a lift, how a long board can be brought up, and whether the room can take a wardrobe up to the ceiling. With that information the team understands the job well before the visit.

A fitted wardrobe in Xaló, as anywhere else, makes use of the whole space and gets rid of the dead strips next to the ceiling. It's the usual choice when there's a free wall or an alcove between two partition walls. A walk-in wardrobe, on the other hand, needs a room or a corner that can be given over to clothes alone, with enough room to walk between the fronts.
Sliding doors win when there is little clearance in front of the wardrobe; hinged doors give full access but need the swing of the door. Before choosing, stretch your arms out in front of the space and check how much room you have to spare. You can find the details of each option under sliding-door wardrobes and made-to-measure walk-in wardrobes.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
You'll use the interior every morning, so it deserves more thought than the colour of the doors. Start by separating hanging clothes from folded ones, and work out the hanging-rail length you need with a tape measure, not by eye. A double-rail section works very well for shirts and trousers folded in half; long garments need a full-height column.
Drawers are best kept for small items such as underwear, socks and belts, and it helps if they sit at waist height. High shelves are good for suitcases or seasonal blankets. If you'd like ideas for getting organised without buying more than you need, the page on wardrobe storage has interior solutions you can add to your design.
Choosing a finish means choosing how your furniture will age. A smooth board in a light tone reflects the light and wipes clean with a cloth; a pronounced grain hides the small marks of everyday use. In a room with a south-facing window, very dark colours show dust and direct sunlight, something you'll notice if you look at a sample at different times of day.
Always ask to see the finish on a real piece and compare it with your floor and walls. The configurator shows a simulation, which is useful for deciding the layout, but the final shade is confirmed with a sample. Check the hardware too: soft-close runners and adjustable hinges avoid problems once the wardrobe has been in use for years.
The cost of a made-to-measure wardrobe comes down to a few factors: width and height, the number of modules, the type of doors, the number of drawers and accessories, and the finish you choose. Two wardrobes of the same width can differ quite a lot in price if one has large-format sliding doors and the other simple hinged doors.
To request a quote for wardrobes in Xaló, it helps to have the measurements of the space, photos of the wall and an idea of what you want to store. Once you've sent your configuration, our team will reply with an indicative figure within 24 hours, at no cost. How that figure is worked out is explained on the prices page, and if you'd rather write to us directly, you can use the quote form.

Once you've accepted the estimate, we arrange the measuring visit. The visit costs €50 only if the order doesn't go ahead; if you do place the order, it's included. During the visit we check for any unevenness in the walls, ceiling and floor, and settle the finishing details. Manufacturing usually takes two to three weeks on average, and the installation is arranged separately.
Xaló is a municipality in its own right, so any permit for major works is processed by its town council and not by Altea's, which is worth knowing if your renovation includes partition walls. For a piece of furniture with no building work, you generally only need to let your community of owners know about the delivery. The full process is set out in how we work.
If your home is in a rural district such as Benibrai or Benibéder, or elsewhere within the municipality, please say so when you send your request so that the exact location is on record. Xaló borders Callosa d'en Sarrià and Altea, and many projects in the area follow the same steps: configuration, estimate and measuring visit. You can see how the service works in the towns around Altea in the areas section.
If you're torn between two homes, or between two rooms for the wardrobe, prepare one configuration for each. Comparing the two estimates using the same starting measurements saves you from making decisions blind.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Yes, as long as you say so when you send your request. We'll confirm the project's actual address with you and arrange the measuring visit from there. If your home is in Benibrai, Benibéder or another part of the municipality, please note it from the start.
The width, height and depth of the space, the type of doors you prefer and a few photos of the wall. If there are sockets, radiators or a window nearby, let us know. With that we prepare a guide figure, which is adjusted after the measuring visit.
Settle the measurements and the interior layout first, then compare only the fronts. That way you can see how much of the price comes from the finish and how much from the wardrobe itself. Ask for a sample of the colour before you decide.
In Xaló, the town's own Ayuntamiento (town council). For a wardrobe that needs no building work, it is usually enough to let the residents' association know on the day of delivery.
Yes, as long as the design is planned in modules from the start. Mention it when preparing the configuration so that the sides and runners allow you to add a column or a block of drawers later.
Open the configurator with the measurements of your room or message us on WhatsApp. We'll send you a guide estimate and then arrange the measuring visit.